801-972-3105 | email us
For all your pump needs, we’ll make it happen…
SUMMIT - 2196 ANSI DIMENSIONAL MODEL
- Capacities to 6000 gpm
- Heads to 730 feet
- Pressures to 375 psi
- Temperatures to 700 degrees F
- Back pull out design
- External impeller adjustment
- Maximum interchangeability
- Standard bronze Inpro® labyrinth seals
- Heavy duty shaft & bearings
- Rigid frame foot
- Fully open impeller
- Extra large oil sump
To Order Consult your Advanced Fluid Systems Representative
SUMMIT - 2196 LOW FLOW HIGH HEAD PUMP
- Radial vane impeller with balance holes
- Interchangeability with existing ANSI pumps
- Circular non-expanding case
To Order Consult your Advanced Fluid Systems Representative
SUMMIT - 296R
Utilizes your existing 2196 power end and ANSI bolt pattern.
- Handles fibrous and shear sensitive materials
- Minimizes degradation of solids
- Available in 5 different sizes and a variety of materials
To Order Consult your Advanced Fluid Systems Representative
SUMMIT - CLOSE COUPLED/FRAME MOUNTED
- Summit CC & FM pumps are horizontal, end suction, centrifugal pumps designed for general service such as water, solvents, light oils, non-corrosive chemicals, coolants and brines.
- Available in capacities to 2300 GPM and heads to 200 feet, these pumps are an economical and dependable solution for your pumping needs.
- All flanges are 125lb ANSI B16.1 rating, NPT connections are standard on 6" and 8" sizes.
- A renewable bronze shaft sleeve is standard on cast iron pumps, and a 316SS shaft sleeve is standard on alloy pumps.
- Close Coupled Pump - Model CC is directly mounted to a NEMA "C" face motor, and designed to use minimal space.
- Frame Mounted Pump - Model FM - are constructed with a rigid bearing frame, flexibly coupled, and mounted on a fabricated steel base with optional drip pan.
- Interchangeable Parts: Component parts, of similar sizes, are interchangeable between frame mounted and close coupled pumps.
To Order Consult your Advanced Fluid Systems Representative
SUMMIT - MODEL CLARK III
- Conforms to ASME B73.1M (ANSI)
- Semi-open reverse vane impeller
- Capacities to 5,000 GPM
- Head to 740 feet
- Pressures to 375 PSI
- Back pull out design
- Indexed bearing housing for ease and accurate
- mpeller adjustment
- Maximum interchangeability of parts
To Order Consult your Advanced Fluid Systems Representative
SUMMIT - DSR / DSN
- Capacities to 6,000 GPM
- Heads to 430 feet
- Horizontal split case design
- High efficiency and low NSPHr
- Closed Impeller
To Order Consult your Advanced Fluid Systems Representative
SUMMIT - SN - SELF PRIMING, NON-CLOGGING PUMPS
- Self Priming
- Capacities to 3,400 gpm
- Temperatures to 160 degrees F
- Back pull out design
- Direct drive or V-belt
- Non clogging
- Hard faced mechanical seals standard
- Standard spool piece flanges
To Order Consult your Advanced Fluid Systems Representative
SUMMIT - SP
- Heavy Duty Slurry Pumps
- High Chrome or Rubber Removable Wear Parts
- Corrosion and Abrasion Resistant Design
- Packed Box Standard
To Order Consult your Advanced Fluid Systems Representative